[MTCAM CHROMA] (Memory Chroma key)
You can have the movie swap into the blue area of a still image such as an illustration or into a frame with a blue area enclosed by the frame.
Still image |
| Movie | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Blue
1 Check that you have a “Memory Stick Duo” with the still image to be superimposed and a tape (only if you are recording on tape) in your camcorder.
2 Slide the POWER switch repeatedly to select the
3 Touch 
.
4 Touch [MEMORY MIX].
If the item is not displayed on the screen,
touch 
/ 
. If you cannot find it, touch
[MENU], and select it from the 
(PICT. APPLI.) menu.
The still image stored in the “Memory Stick Duo” will be displayed on the thumbnail screen.
Thumbnail screen
60min 
STBY 0:00:00
MEMORY MIX: OFF
OFF 
M
CAM
LUMI.
|
| CAM M |
| M CAM |
101 |
|
| ||
| CHROMA |
| CHROMA | |
| ||||
OK
5 Touch 
(previous)/ 
(next) to select the still image to overlap.
6 Touch the desired effect.
The still image is superimposed on the movie which is currently displayed on the LCD screen.
60min 
STBY 0:00:00
MEMORY MIX: CAM M CHROMA
101
OK
7 Touch 
(decrease)/ 
(increase) to adjust the following.
For [MTCAM LUMI.]
The color scheme of the bright area in the still image which is to be swapped into a movie. When you want to record only the still image stored on the “Memory Stick
Duo” to a tape, touch 
on the screen in [MTCAM LUMI.] until the bar indicator is extended fully to the right side.
For [CAMTM CHROMA]
The color scheme of the blue area in the movie.
For [MTCAM CHROMA]
The color scheme of the blue area in the still image which is to be swapped into a movie.
8 Touch 
twice.
appears.
9 Start recording.
When you are recording on a tape
Press REC START/STOP.
When you are recording on a “Memory Stick Duo”
Press PHOTO fully.
To cancel MEMORY MIX
Follow steps 3 and 4, then touch [OFF] in step 5.
bNotes
•When the overlapping still image has a large amount of white, the image in the thumbnail screen may not be clear.
46Recording