To resume, touch [REC START].To cancel, touch [REC STOP], then [END] in step 2.

•During Smooth interval recording, your camcorder may perform the END SEARCH function to locate the end in current recordings on the tape after several frames have been recorded.

•Do not turn off the power or disconnect the power source while a message is displayed on the screen.

•The camcorder will shoot several frames for the first and last shots of the Smooth interval recording.

•Smooth interval recording is released when approximately 12 hours have elapsed after shooting has begun.

•Sounds are not recorded.

•The last few frames may not be recorded if the battery or tape has run out.

•There may be discrepancies in the interval.

•If you adjust the focus manually, you can record clear pictures even if the light changes ([FOCUS], p. 51).

•You can silence the recording beep by setting of [BEEP] (p. 68).

INT.REC-STL (Interval photo recording)

You can record still images on the “Memory Stick Duo” at a selected interval. This function is useful to observe the movement of clouds or the changes in daylight, etc.

[a]: Recording

[b]: Interval

1Touch t a desired interval time (1, 5or 10 minutes) t t [ON] ( ) t

t .

2Press PHOTO fully. stops flashing and the interval still image recording starts.
To cancel [INT.REC-STL], select [OFF] in step 1.DEMO MODE

The default setting is [ON], allowing you to view the demonstration in about 10 minutes, after you have removed both a cassette and a “Memory Stick Duo” from your camcorder, and slide the POWER switch repeatedly to turn on the CAMERA- TAPE lamp.

• The demonstration will be suspended in

situations such as those described below.

 

– When you touch the screen during the

 

 

demonstration. (The demonstration starts

 

again after about 10 minutes.)

 

Using

inserted.

– When a cassette or a “Memory Stick Duo” is

 

– When the POWER switch is set to other than

the

 

CAMERA-TAPE.

Menu

 

 

 

 

PictBridge PRINT

 

 

 

See page 82.

 

 

 

 

 

USB SELECT

 

 

You can connect the camcorder to a

 

personal computer with a USB cable and

 

view pictures on the computer. You can

 

also connect the camcorder to a PictBridge-

 

compatible printer (p. 82) using this

 

function. Refer to “First Step Guide” on the

 

supplied CD-ROM for details.

 

 

 

Memory Stick

 

 

 

 

Select this to view pictures on a “Memory

 

Stick Duo” on the computer or to import

 

them to the computer.

 

PictBridge PRINT

 

Select this when you connect the

 

camcorder to a PictBridge-compatible

 

printer to print out directly (p. 82).

 

 

 

STREAM

 

 

 

 

Select this to view movies on a tape on the

 

computer or to import them to the

 

computer.

 

Continued , 63