OPTIONAL LOUVERS
INSTALLATION
INSTRUCTIONS
Optional | Model |
Louver | Number |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
INSTALLING OPTIONAL LOUVER
Attention: Remove protective film on brass louver before installation.
Attention: The optional top louver has (4) mounting tabs. The optional bottom louver has (2) clearance holes.
1.Remove (2) Phillips screws that attach upper, panel front to casing top.
2.At the top, leading edge of upper, panel front push down and outward to remove upper, panel front.
3.Remove (2) Phillips screws that attach lower, panel front to casing bottom.
4.At the top, leading edge of lower, front panel push up and outward to remove lower, front panel.
5.Align and insert (4) mounting tabs on optional top louver with (4) slots on casing top. Push downward to lock the optional top louver into position.
6.Tighten one provided 1/2" screw into optional bottom louver. Partially tighten second provided 1/2" screw into optional bottom louver. Insert tightened 1/2" screw in optional bottom louver into bottom of fireplace.
7.Push and pivot optional bottom louver into bottom of fireplace. Complete tightening of second 1/2" screw into bottom of fireplace.
8.Place magnets at top of one inch flanges that bottom louver rests against when closed.
9.Installation of optional louvers is completed.
14 |
