Intel Revision 1.1 manual PROSet Software, 3.1Launching the PROSet Installer, 3.2Installing PROSet

Intel® PRO/Wireless 2100 Network Connection Software

, Rev. 1.1

3 PROSet Software

The following sections contain the procedures for launching and installing the Intel® PROSet/Wireless Software application and using PROSet command line options.

3.1Launching the PROSet Installer

This section describes how to launch the PROSet Installer with Autorun enabled or with Autorun disabled.

3.1.1Launching the PROSet Installer with Autorun Enabled

1.Insert the installation CD and wait a few seconds.

2.If Autorun is enabled on your system, the Intel® PRO/Wireless Network Connection window should open. If it does not appear, follow the procedure in Section 3.1.2, Launching the PROSet Installer with Autorun Disabled.

3.Click Install Software to launch PROSet installation. The Welcome to the InstallShield Wizard for Intel® PROSet window appears. Skip to Section 3.2, Installing PROSet.

3.1.2Launching the PROSet Installer with Autorun Disabled

1.Open My computer.

2.Double-click the CD-ROMicon.

3.Double-click the Autorun application.

4.Click Install Software to launch PROSet installation. When the Welcome to the InstallShield Wizard for Intel® PROSet window appears, follow the procedure in Section 3.2.1, Typical Installation.

3.2Installing PROSet

The following sections describe four PROSet installation options:

•Typical Installation

•Custom Installation

•Command Line Installation

•Silent Installation

3.2.1Typical Installation

1.In the Welcome… window, click Next.

2.Read the license agreement and select I accept the terms in the license agreement. Click Next.

3.Choose the Typical or Custom setup type by clicking an appropriate option. Click Next. (For a Custom setup type, see Section 3.2.2, Custom Installation, for details.)

4.Click Install to begin installation.

4

Intel Customer Support