Installing the Power Supply
Required tool: Phillips screwdriver
8957FA
1.If necessary, remove the filler panel from a power supply bay.
8958FA
2.Push the supply firmly into the bay.
Note: If you are installing a power supply in a new chassis, be sure to remove the bag of dessicant from the middle power supply bay.
8959FA
3.Align and tighten the retaining screws.
8960FA
4.Connect the power cord to the power supply and to an AC power outlet that is on a circuit with no other equipment connected to it.
Connect each power supply in the chassis to a separate AC circuit.
6
