Dubbing to VCR/DVD device, etc. (Continued)

DCR-HC46/HC96:

 

 

 

A/V or A/V OUT jack

 

1

 

 

 

 

 

AUDIO/VIDEO

 

 

A/V

jacks

(White)

(Red)

(Yellow)

VCR/DVD

device,

etc.

To S VIDEO jack

To i.LINKjackDV2
To DV Interface (i.LINK)

3

 

: Signal flow

AA/V connecting cable (supplied)

For DCR-HC46/HC96:

The Handycam Station and your camcorder are both equipped with A/V jacks (p. 84). Connect the A/V connecting cable either to the Handycam Station or to your camcorder, depending on your setup.

BA/V connecting cable with S VIDEO (optional)

When connecting to another device via the S VIDEO jack, by using the A/V connecting cable with an S VIDEO cable, pictures can be reproduced more faithfully than with the supplied A/V cable connection. Connect the white and red plugs (left/right audio) and S VIDEO plug (S VIDEO channel) of an A/V connecting cable. In this case, the yellow (standard video) plug connection is not necessary. S VIDEO connection only will not output audio.

Ci.LINK cable (optional)

Use an i.LINK cable to connect your camcorder to another device equipped with an i.LINK jack. The video and audio signals are transmitted digitally, producing high quality pictures and sound. Note that you cannot output picture and sound separately.

•When you are connecting your camcorder to a monaural device, connect the yellow plug of the A/V connecting cable to the video jack, and the red (right channel) or the white (left channel) plug to the audio jack on the VCR/TV.

•When you connect a device via an A/V connecting cable, set [DISP OUTPUT] to [LCD PANEL] (the default setting) (p. 68).

•While your camcorder is sending signals to

another device via an i.LINK cable,

appears on the LCD screen on your camcorder.

72