29
Recording/Playback
Changing the settings of your camcorder recordings
.
Move the power zoom lever D slightly for
a slower zoom. Move it further for a faster
zoom.
zTips
• The minimum distance required between your
camcorder and the subject for focus is about
1cm (about 13/32 in.) for wide angle and about
80cm (about 2 5/8 feet) for telephoto.
• The focus may not be adjusted at certain zoom
positions if the subject is within 80cm ( about
25/8 feet) from your camcorder.
• Be sure to keep your finger on the power zoom
lever D. If you move your finger off the power
zoom lever D, the operation sound of the
power zoom lever D may also be recorded.
1Set the handle zoom switch B to VAR
or FIX.
zTips
• When you set the handle zoom switch B to
VAR, you can zoom in or out at variable
speed.
• When you set the handle zoom switch B to
FIX, you can zoom in or out at fixed speed
set in [HANDLE ZOOM] (p.71).
2Press the handle zoom lever A to zoom
in or out.
bNotes
• You cannot use the handle zoom lever A when
the handle zoom switch B is set to OFF.
• You cannot change the zoom speed of the power
zoom lever D with the handle zoom switch B.
You can zoom at the desired speed by
turning the zoom ring C. Fine adjustment
is also possible.
bNotes
• Turn the zoom ring C at a moderate speed. If
you turn it too fast, the zoom speed may lag
behind the zoom ring rotation speed, or the
operation sound of the zoom may also be
recorded.

Adjusting the zoom

Using the power zoom lever

Close view: (Telephoto)
Wide view: (Wide angle)

Using the handle zoom

Using the zoom ring

Continued ,