About the “InfoLITHIUM” battery pack

Your camcorder operates only with an “InfoLITHIUM” battery pack (H series). “InfoLITHIUM” H series battery packs

have the

mark.

What is an “InfoLITHIUM” battery pack?

An “InfoLITHIUM” battery pack is a lithium-ion battery pack that has functions for communicating information related to operating conditions between your camcorder and an AC Adaptor/charger (sold separately).

The “InfoLITHIUM” battery pack calculates the power consumption according to the operating conditions of your camcorder, and displays the remaining battery time in minutes.

The battery pack NP-FH50 is compatible with “ActiFORCE.” “ActiFORCE” is a new generation power system. Battery capacity, boost charge, and the speed and accuracy of battery time remaining calculations have been improved when compared with current “InfoLITHIUM” P-series batteries.

To charge the battery pack

Be sure to charge the battery pack before you start using your camcorder.

We recommend charging the battery pack in an ambient temperature of between 10 C to 30 C (50 ˚F to 86 ˚F) until the CHG (charge) lamp turns off. If you charge the battery pack outside of this temperature range, you may not be able to charge it efficiently.

To use the battery pack effectively

Battery pack performance decreases when the ambient temperature is 10 C (50 °F) or below, and the length of time you can use the battery pack becomes shorter. In that case, do one

of the following to use the battery pack for a longer time.

Put the battery pack in a pocket to warm it up, and install it on your camcorder right before you start taking shots.

Use a large capacity battery pack: NP-FH70/ FH100 (sold separately).

Frequent use of the LCD screen or a frequent playback, fast forward or reverse operation

wears out the battery pack faster. We recommend using a large capacity battery pack: NP-FH70/FH100 (sold separately).

Be sure to close the LCD screen when not recording or playing back on your camcorder. The battery pack is also consumed when your camcorder is in recording standby or playback pause.

Have spare battery packs ready for 2 or 3 times the expected recording time, and make trial recordings before making the actual recording.

Do not expose the battery pack to water. The battery pack is not water resistant.

About the remaining battery time indicator

When the power goes off even though the remaining battery time indicator indicates that the battery pack has enough power to operate, charge the battery pack fully again. Remaining battery time will be indicated correctly. Note, however, that the battery indication will not be restored if it is used in high temperatures for a long time, or if left in a fully charged state, or when the battery pack is frequently used. Use the remaining battery time indication as a rough guide only.

The mark that indicates low battery flashes even if there are still 20 minutes of battery time remaining, depending on the operating conditions or ambient temperature.

About storage of the battery pack

If the battery pack is not used for a long time, fully charge the battery pack and use it up on your camcorder once a year to maintain proper function. To store the battery pack, remove it from your camcorder and put it in a dry, cool place.

To discharge the battery pack on your

camcorder completely, touch (HOME) (SETTINGS) [GENERAL SET] [A.SHUT OFF] [NEVER], and leave your

camcorder in recording standby until the power goes off (p. 81).

About battery life

Battery capacity decreases over time and through repeated use. If decreased usage time between charges becomes significant, it is probably time to replace it with a new one.

Contents of Table

Techniques Recording Useful

Index

106