You use your camcorder in a hot and humid place.

How to prevent moisture condensation When you bring your camcorder from a cold place into a warm place, put your camcorder in a plastic bag and seal it tightly. Remove the bag when the air temperature inside the plastic bag has reached the surrounding temperature (after about 1 hour).

LCD screen

Do not exert excessive pressure on the LCD screen, as it may cause uneven color and other damage.

If your camcorder is used in a cold place, a residual image may appear on the LCD screen. This is not a malfunction.

While using your camcorder, the back of the LCD screen may heat up. This is not a malfunction.

To clean the LCD screen

If fingerprints or dust make the LCD screen dirty, it is recommended that you use a soft cloth to clean it.

When you use the LCD Cleaning Kit (sold separately), do not apply the cleaning liquid directly to the LCD screen. Use cleaning paper moistened with the liquid.

On adjustment of the touch panel

(CALIBRATION)

The buttons on the touch panel may not work correctly. If this happens, follow the procedure below. It is recommended that you connect your camcorder to the wall outlet (wall socket) using the supplied AC Adaptor during the operation.

Touch (HOME) (SETTINGS) [GENERAL SET] [CALIBRATION].

Touch “” displayed on the screen with the corner of “Memory Stick PRO Duo” media or the like 3 times.

Touch [CANCEL] to cancel calibration.

Notes

If you did not press the right spot, try the calibration again.

Do not use a sharp-pointed object for calibration. Doing so may damage the LCD screen.

You cannot calibrate the LCD screen if it is rotated, or closed with the screen facing out.

On handling the casing

If the casing is soiled, clean the camcorder body with a soft cloth lightly moistened with water, and then wipe the casing with a dry soft cloth.

Avoid the following to avoid damage to the finish:

Using chemicals such as thinner, benzine, alcohol, chemical cloths, repellent, insecticide and sunscreen

Handling the camcorder with above substances on your hands

Leaving the casing in contact with rubber or vinyl objects for a long period of time

About care and storage of the lens

Wipe the surface of the lens clean with a soft cloth in the following instances:

When there are fingerprints on the lens surface

In hot or humid locations

When the lens is exposed to salty air such as at the seaside

Store in a well-ventilated location subject to little dirt or dust.

To prevent mold, periodically clean the lens as described above.

On charging the pre-installed rechargeable battery

Your camcorder has a pre-installed rechargeable battery to retain the date, time, and other settings even when the LCD screen is closed. The pre- installed rechargeable battery is always charged while your camcorder is connected to the wall outlet (wall socket) via the AC Adaptor or while the battery pack is attached. The rechargeable battery will be fully discharged in about 3 months if you do not use your camcorder at all. Use your camcorder after charging the pre-installed rechargeable battery.

However, even if the pre-installed rechargeable battery is not charged, the camcorder operation

Contents of Table

Techniques Recording Useful

Index

108