102
(Warning indicator
pertaining to battery pack
temperature)
• The battery pack is too hot. Replace the
battery pack, or remove it and put it in a
cool place.
(Warning indicator pertaining to
battery pack temperature)
•T he battery pack is too cold. Replace
the battery pack, or remove it and put it
in a warm place.
Q (Warning indicators pertaining to
the tape)
Slow flashing:
• There is less than 5 minutes remaining
on the tape.
• No cassette is inserted.
• The write-protect tab on the cassette is
set to lock (p. 105).
Fast flashing:
• The tape has run out.
Z (Eject cassette warning)
Slow flashing:
• The write-protect tab on the cassette is
set to lock (p. 105).
Fast flashing:
• Moisture condensation has occurred
(p. 110).
• The self-diagnosis display code is
displayed (p. 101).
- (Warning indicator pertaining
to the write-protect of the “Memory
Stick Duo”)
• The write-protect tab on the “Memory
Stick Duo” is set to lock (p. 106).
zTips
• You will hear a beep when certain messages
appear on the screen.
If messages appear on the screen, follow the
instructions.
xBattery/Power
Cannot use this battery in the
camcorder. (p. 107)
xMoisture condensation
%Z Moisture condensation. Eject
the cassette (p. 110)
% Moisture condensation. Turn off
for 1H. (p. 110)
xCassette/Tape
Z Reinsert the cassette. (p. 23)
•C heck if the cassette is damaged.
QZ The tape is locked - check the
tab. (p. 105)
x“Memory Stick Duo”
Reinsert the Memory Stick.
(p. 23, 106)
•R einsert the “Memory Stick Duo” a
few times. If even then the indicator
flashes, the “Memory Stick Duo” might
be damaged. Try with another
“Memory Stick Duo.”
This Memory Stick is not
formatted correctly.
•Check the format, then format the
“Memory Stick Duo” as necessary
(p. 77, 106).