To cancel the operation

Press ZERO SET MEMORY again.

bNote

•There may be a discrepancy of several seconds between the time code and the tape counter.

•Zero set memory will not function correctly if there is a blank section between recorded sections on the tape.

Searching for a scene by date of recording – Date search

You can locate the point where the recording date changes.

SEARCH MODE

. / >

STOP

1 Set the POWER switch to VCR.

2 Press SEARCH MODE on the Remote Commander repeatedly to select [DATE SEARCH].

3 Press . (previous)/> (next) on the Remote Commander to select a recording date.

You can select the previous or the next date of the present point on the tape.

Playback starts automatically from the point where the date changes.

To cancel the operation

Press STOP on the Remote Commander.

bNote

•If 1 day’s recording is less than 2 minutes, your camcorder may not accurately find the point where the recording date changes.

•The Date search will not function correctly when there is a blank section between recorded sections on the tape.

Searching for a recording start point – Index search

You can locate the point where an index signal is recorded (p. 39).

SEARCH MODE

. / >

STOP

1 Set the POWER switch to VCR.

2 Press SEARCH MODE on the Remote Commander repeatedly to select [INDEX SEARCH].

3 Press . (previous)/> (next) on the Remote Commander to select an index point.

You can select the previous or the next index signal of the present point on the tape. Playback starts automatically from the point where the index signal is recorded.

To cancel the operation

Press STOP on the Remote Commander.

bNote

•If 1 day’s recording is less than 2 minutes, your camcorder may not accurately find the index point.

•The Index search will not function correctly when there is a blank section between recorded sections on the tape.

50Playback