Sony HDR-FX1E battery, Procedures, 1Remove the viewfinder, Information Additional, To charge the pre-installed button-type, Removing dust from inside the viewfinder

• To prevent molds periodically clean the lens	2 Remove dust from inside the viewfinder
as described above.	and the part shown below with a blower.
It is recommended you operate your camcorder
about once a month to keep it in an optimum
state for a long time.
To charge the pre-installed button-type
battery
Your camcorder has a pre-installed button-type
battery to retain the date, time, and other
settings even when the POWER switch is set to
OFF (CHG). The pre-installed button-type
battery is always charged while you are using
your camcorder but it will get discharged
gradually if you do not use your camcorder. The
button-type battery will be fully discharged in
about 3 months if you do not use your
camcorder at all. However, even if the pre-
installed button-type battery is not charged, the
camcorder operation will not be affected if you
are not recording the date.
Procedures
Connect your camcorder to a wall socket using
the supplied AC Adaptor, and leave it with the
POWER switch set to OFF (CHG) for more
than 24 hours.

Removing dust from inside the viewfinder1Remove the viewfinder.

While sliding the viewfinder release lever down 1, slide and remove the viewfinder

2.

Information Additional

Additional Information 97