qg Zoom buttonsPress for zooming in/out.

You can magnify still images from about

1.1to 5 times the original size (Playback zoom).

•When you touch the screen during playback zoom, the point you touched will be displayed in the center of the LCD screen.

qh RESET buttonPress RESET to initialize all the settings including the clock setting.qk EASY button

Press EASY to display and most of the settings are set automatically for easy recording/playback. To cancel, press EASY again.

ql DISP/BATT INFO button

You can switch the screen display when you press while the power is set to on. When you press while the POWER switch is set to OFF (CHG), you can check the remaining battery.

wa Built-in microphone Sound picked up by the internal microphone is converted to 5.1ch surround sound and recorded.

ws Flash

The flash will flash automatically depending on recording conditions in the default setting.

Touch (HOME) t (SETTINGS)t[PHOTO SETTINGS] t [FLASH MODE] to change the setting.wd Remote sensor/Infrared port Receives the signal from the Remote Commander.wf Camera recording lamp

The camera recording lamp lights up in red during recording. The lamp flashes when the remaining media capacity or battery power is low.

wh Tripod receptacle (Bottom surface) Attach a tripod (optional) to the tripod receptacle using a tripod screw (optional:

the length of the screw must be less than 5.5 mm (7/32 in.)).wj MANUAL button

You can display the [DIAL SETTING] screen with pressing and holding the manual button.

wk . (back light) button

Press . (back light) to display . for adjusting the exposure for backlit subject. Press . (back light) again to cancel the backlight function.

wl CAM CTRL dialYou can use the menu item assigned on the [DIAL SETTING] screen.Connecting to other devices

8MIC (PLUG IN POWER) jack When an external microphone (optional) is connected, it takes precedence over the Built-in microphone (p. 17).

9 i (headphones) jackq; HDMI OUT (mini) jackConnect with the HDMI cable (optional).qa A/V Remote Connector/A/V OUT jackConnect with the component A/V cable or A/V connecting cable.qs (USB) jackConnect with the USB cable.qj (DISC BURN) button

Create a disc by connecting the camcorder to a computer, etc. For details, see “PMB Guide” (p. 27).

w; Active Interface Shoe

The Active Interface Shoe supplies power to optional accessories such as a video light, a flash, or a microphone. The accessory can be turned on or off as you operate the POWER switch on your camcorder.

wg Interface connectorConnect your camcorder and the Handycam Station.

Recording/Playback

17