Sony HDR-SR12E p.32), p.37), recorded, F(or B) again, 2 Press START/STOP F (or B), To stop recording, press START/STOP, •You can switch the shooting mode by touching

Recording movies Recording still images

1 Turn the POWER switch C in the direction of the arrow until the (Movie) lamp lights up.

2 Press START/STOP F (or B).

[STBY] b [REC]

To stop recording, press START/STOP

F(or B) again.

1 Turn the POWER switch C in the direction of the arrow until the (Still) lamp lights up.

2 Press PHOTO E lightly to adjust the focus A (a beep sounds), then press it fully B (a shutter click sounds).

10.2M

Flashing b Lights up

appears beside or . When disappears, the image has beenrecorded.

zTips

•For the recordable time and the number of recordable images, see pages 11, 24 and 74.

•You can record still images during movie recording by pressing PHOTO E ([Dual Rec],

p.32).

•A frame is shown on the detected face, and the detected face image is optimized automatically ([FACE DETECTION], p. 72).

•When a face is detected during movie recording, flashes and the detected face is stored in the index. You can search for a desired scene by a face image when playing back ([Face Index],

p.37).•You can capture still images from recorded movies (p. 51).•You can switch the shooting mode by touching (HOME) A (or D) t (CAMERA) t [MOVIE] or [PHOTO].

•The LCD screen of your camcorder can display recording images across the entire screen (full pixel display). However, this may cause slight trimming of the top, bottom, right, and left edges of images when played back on a TV which is not compatible with full pixel display. In this case, set [GUIDEFRAME] to [ON]

(p. 70), and record images using the outer frame displayed on the screen as a guide.

30