Dubbing to other devices

Connecting with the A/V connecting cable

You can dub images played back on your camcorder to other recording devices, such as VCRs or DVD/HDD recorders. Connect the device in either of the following ways.

Connect your camcorder to the wall outlet (wall socket) using the supplied AC Adaptor for this operation (p. 15). Refer also to the instruction manuals supplied with the devices to be connected.

bNotes

Movies recorded with HD (high definition) image quality will be dubbed with SD (standard definition) image quality.

To copy a movie recorded with HD (high definition) image quality, install the application software (supplied) on your computer, and copy the images to a disc in the computer.

Since dubbing is performed via analog data transfer, the image quality may deteriorate.

(Yellow)

IN

 

IN

 

(White)

(Red)

(Yellow) (White)

(Red)

 

 

S VIDEO VIDEOAUDIOVIDEO

AUDIO

Devices with an S VIDEO jack: Video/Signal flow
VCRs or DVD/ HDD recorders
Devices without an S VIDEO jack
AA/V connecting cable (supplied)

Your camcorder and the Handycam Station are equipped with A/V Remote Connector or A/V OUT jack (p. 100, 102). Connect the A/V connecting cable either to the Handycam Station or to your camcorder, depending on your setup.

BA/V connecting cable with S VIDEO (optional)

When connecting to another device via the S VIDEO jack, by using an A/V connecting cable with an S VIDEO cable (optional), higher quality images can be produced than with an A/V connecting cable. Connect the white and red plug (left/right audio) and the S VIDEO plug (S VIDEO channel) of the A/V connecting cable with an S VIDEO cable (optional). The yellow plug connection is not necessary. S VIDEO connection only will not output audio.

52