Notes
The recommended distance to the subject when using the
Remove any dust from the surface of the flash before using it. Flash effect may be impaired if heat discoloration or dust obscures the lamp.
The /CHG (charge) lamp (p. 18) flickers while charging the flash, and remains lit when the battery charge is complete.
If you use the flash in bright places such as when shooting a backlit subject, the flash may not be effective.
FLASH LEVEL
You can set this function when you use the
Steps
(MENU) [FLASH LEVEL] (under [PHOTO SETTINGS] category) a desired setting
HIGH ( |
|
|
| ) | Makes the flash level higher. |
|
|
|
NORMAL ()
LOW ( |
| ) | Makes the flash level lower. |
|
REDEYE REDUC (Redeye reduction)
You can set this function when you record photos using the
When you set [REDEYE REDUC] to [ON], then set [FLASH MODE] to [AUTO] or [ON], appears. You can prevent redeye by activating the
Steps
(MENU) [REDEYE REDUC] (under [PHOTO SETTINGS] category) a desired setting
| OFF | Does not prevent redeye. |
| ON ( ) | Prevents redeye. |
Notes
The redeye reduction may not produce the desired effect due to individual differences and other conditions.
The redeye function does not work with automatic recording by [SMILE DETECTION].
FILE NO. (File number)
You can select the way to assign file number of photos.
Steps
(MENU) [FILE NO.] (under [PHOTO SETTINGS] category) a desired setting
Contents of Table
Techniques Recording Useful
Index
80