Hook for wrist strap
Attach the strap (supplied) and place your | USB adaptor cap |
hand through the loop to prevent the |
|
camcorder from damage by being dropped. |
|
Tripod receptacle
Attach a tripod (sold separately) to the tripod receptacle using a tripod screw (sold separately: the length of the screw must be less than 5.5 mm (7/32 in.)).
Interface connector
Connects your camcorder to the “Handycam” Station Cradle or the Dedicated USB Terminal Adaptor.
By attaching the Dedicated USB Terminal Adaptor, you can connect the USB cable to your camcorder without using the “Handycam” Station Cradle.
Dedicated USB
Terminal
Adaptor
USB cable
Notes
Depending on when or where you use the camcorder, attach the Dedicated USB Terminal Adaptor to either the long or the short cable.
Be careful not to hang or give strong impact to the adaptor or the cable. It may become damaged.
Attach the USB adaptor cap on the USB cable when carrying it in bags, etc.
“Handycam” Station Cradle
Interface connector
Connect to the interface connector on your camcorder when you attach your camcorder to the “Handycam” Station Cradle.
A/V OUT jack (43, 60) HDMI OUT jack (44) DC IN jack (18)
(USB) jack (59)
Screen indicators
Upper left | Center | Upper right |
SP
Bottom
Contents of Table
Techniques Recording Useful
Index