Xerox 9050, 9550 3M Overhead Projector 9000 Series, Illustrated Parts Breakdown, 3M Part Number

3M™ Overhead Projector 9000 Series Illustrated Parts Breakdown

Section 13.

Lamp Changer & Hi/Lo Lamp Control Module

(Dual Lamp Versions) Parts List

Item

No.

3M

Part Number

Description

Qty.

12B	78-8073-3012-7	COVER, Resistor, 20W, ENX	1
13A	78-8079-8881-7	LEVER, Lamp Changer, ENX/FXL	1
13B	78-8079-8987-2	LEVER, Lamp Changer, EVD/FNT	1
14	Not Available	SPRING (Used on 9000 Series serial no. 842643 and earlier)	1
15	78-8079-8882-5	LEVER, Switch, Lamp Hi/Lo, Intensity	1
16	12-7995-0850-7	SPRING	1
17	(See Note 1)	WASHER, Lamp Changer (9080, Qty 1)	2
18A	78-8079-8885-8	BRACKET, Lamp Changer	1
		(Used on 9000 Series serial no. 842643 and earlier)
		(Used on 9550 serial number 823581 and earlier)
18B	78-8073-2961-6	BRACKET, Lamp Changer	1
		(Used on 9000 Series serial no. 842644 and up)
		(Used on 9550 serial no. 823582 and up) (9400 - all versions)
19	(See Note 1)	SCREW, Taptite, 4-24 X 3/4	2
20A	78-8079-8889-0	PCB ASSEMBLY, Lamp Changer (Used on 9550 serial
		number 823581 and earlier) (Not used on 9400)	1
20B	78-8073-3105-9	PCB ASSEMBLY, Lamp Changer
		(Used on 9550 serial no. 823582 and up) (Not used on 9400)	1
21	78-8095-8339-2	TAPE, Heat Shield, EVD	1
22A	78-8073-2969-9	SWITCH, Hi/Low (9080 AADT, AHDG, 9085 U.S., plus	1
		AAWB, 9100 Articulate Doublet Head, 9200 Open Triplet
		Head)
22B	78-8073-2970-7	SWITCH, Hi/Low, EVD	1
		(9400 AHRG, AHRS, AHRU, AHRZ, 9550)
23	(See Note 1)	SCREW, Plastite, 4-20 X 3/8 BZN	1

Note 1: Order the 9000 Series Hardware Repair Kit (78-8054-1818-9). This kit contains a complete set of hardware for the 9000 Series O.H.P. *For Europe only, see Sections 16, 17, 18, and 19 for Parts Kits.

© 3M IPC 2001 40