Recording movies

 

 

Recording still images

 

 

 

 

 

You can record movies on the hard disk of your camcorder. For the recordable time, see page 11.

1 Slide the POWER switch C in the direction of the arrow to light up the (Movie) lamp.

2 Press START/STOP B (or F).[STBY] t [REC]To stop recording, press START/STOPB(or F) again.

Still images are recorded on the hard disk in the default setting. To record still images on a “Memory Stick Duo,” change the recording media (p. 31). For the number of recordable still images, see page 68.

1 Slide the POWER switch C until the (Still) lamp lights up.

2 Press PHOTO E lightly to adjust the focus A (a beep sounds), then press it fully B (a shutter click sounds).

Flashing bLights up appears beside /. When disappears, the image has been recorded.

bNotes

You cannot record movies on a “Memory Stick Duo.”

zTips

appears when [ INDEX SET] is set to [ON] (the default setting) during movie recording (p. 67).

You can switch the shooting mode by touching

(HOME) D (or A) t (CAMERA) t [MOVIE] or [PHOTO].

See page 30 for recording high quality still images during movie recording.

See page 31 for changing the recording media of still images.

28