Sony HDRSR5, HDRSR7, HDRSR8 Notes, bNotes, Editing, To finish printing, 7 Touch [EXEC] t [YES] t, [SIZE]: Select the paper size, The selected image is marked with

4 Touch [ PRINT] (hard disk) or [ PRINT] (“Memory Stick Duo”) depending on the media of the image to be printed.

When connection is complete, (PictBridge connecting) appears on the screen. You can select a still image on the screen.5 Touch the still image to be printed.The selected image is marked with .

Press and hold the image on the LCD screen to confirm the image.

Touch to return to the previous screen.

6 Touch (OPTION), set the following options, then touch .

[COPIES]: Set number of copies of a still image to be printed. You can set up to 20 copies.

[DATE/TIME]: Select [DATE], [DAY&TIME], or [OFF] (no date/time printed).[SIZE]: Select the paper size.If you do not change the setting, go to step 7.7 Touch [EXEC] t [YES] t .The image selection screen appears again.To finish printingTouch on the image selection screen.

bNotes

•We can guarantee the operation of only models that are PictBridge compatible.

•Refer also to the instruction manual of the printer to be used.

•Do not attempt the following operations when

is on the screen. The operations may not be performed properly.

–Operate the POWER switch.

–Press (VIEW IMAGES).

–Remove your camcorder from the Handycam Station.

–Disconnect the USB cable from the Handycam Station or the printer.

–Remove the “Memory Stick Duo” from your camcorder, in the case of [ PRINT].

•If the printer stops working, disconnect the USB cable, turn the printer off and on again, and restart the operation from the beginning.

•You can select only the paper sizes that the printer can print.

•On some printer models, the top, bottom, right, and left edges of images may be trimmed. If you print a still image recorded in a 16:9 (wide)

Editing

55