Chapter 1:
Setting Up
Connecting the Stereo
Inserting the Batteries
Connecting the
Stereo
Use the illustrations below to connect your stereo.
If you want to connect any optional components to the stereo, see “Connecting Optional Equipment” in Chapter 6.
If you set up the stereo system vertically
Be sure to place the Amplifier/Tuner on top of the CD player/Tape Deck.
STEP 3 Connecting the
Aerials
AM loop aerial (supplied)
AM
FM 75
COAXIAL
Setting the Clock
STEP 1 Connecting the
Flat Cords
Connect the supplied flat cords to SYSTEM CONTROL connectors of the same color by pressing the centre of the flat cord connector until it clicks into place.
To disconnect the flat cords
Pull out the flat cord connector while pressing in on the sides. Do not pull the flat cord itself.
FM lead aerial* (supplied)
*Extend horizontally
AM loop aerial connection
Connect the supplied loop aerial to the AM and the y terminal.
To improve the FM reception
Connect an outdoor FM aerial to the FM
75Ω terminal, using a
AM
FM 75
COAXIAL
STEP 2 Connecting the
Speakers
Connect the right speaker to the R connectors and the left speaker to the L connectors.
See the instruction manual provided with the speakers for details of connectors.
+ |
|
– |
|
R | L |
|
4
Chapter 1: Setting Up