Chapter 3:
the Radio
Listening to the Radio
Presetting Radio Stations
Playing Preset Radio
Stations
Tuning by Programme Type (PTY)
Listening to the
Radio
When you want to play a radio programme, you can have the tuner automatically scan the radio frequencies and tune in the stations with clear signals. This feature saves you time in searching for stations with clear signals. However, stations with weak signals may be skipped by automatic tuning. Manually tune in the ones skipped by automatic tuning.
SYSTEM
POWER m ON
1
2
3
STEREO/MONO
|
| p |
|
|
|
| ( |
|
|
| 9 | ) |
|
|
|
| 0 |
| p |
|
|
|
| |
|
| P |
| p |
|
| ( |
| P |
|
|
|
| |
BAND |
| ( |
| + |
|
|
| ||
|
|
| = | ) |
|
|
|
| |
|
|
|
| 0 |
1 Press TUNER/BAND (or BAND on the remote) repeatedly until the band you want appears in the display.
As you press this button, the band changes as follows:
German and Italian models
FM ˜ AM
Other models
FM n MW n LW
n
TUNER
VOLUME
63 125 250 500 1k 2k 4k 8k 16k(Hz)
DBFB
MHz PRESET
2 Press TUNING MODE repeatedly until “AUTO” appears in the display.
3 Turn the JOG dial clockwise to scan a higher frequency station. To tune in a lower frequency station, turn the JOG dial
The tuner starts scanning radio frequencies, and stops automatically when it finds a clear station. “TUNED” appears in the display. “STEREO” also appears if the tuned FM station is broadcasting in stereo.
TUNER
VOLUME
63 125 250 500 1k 2k 4k 8k 16k(Hz) TUNED STEREO
AUTO
DBFB
MHz
4 If you do not want to listen to the station selected, turn the JOG dial again to restart the scan.
If the tuner finds an RDS station
The frequency display changes to the station name.
When the desired station is not tuned in
Automatic tuning may skip stations with a weak signals. Tune in the station manually.
1Press TUNING MODE repeatedly until “MANUAL” appears in the display.
2Keep turning the JOG dial until the desired station is tuned in.
To improve MW/LW/AM broadcast reception
Reorient the supplied AM loop aerial for MW/LW/AM.
MW/LW/AM
When an FM programme is not clear to receive
Press STEREO/MONO on the remote so that “MONO” appears in the display. There will be no stereo effect, but the reception will improve. Press STEREO/MONO again to restore the stereo effect.
One Touch Play feature
Press TUNER/BAND when the power is off. You will be able to start listening to the last received station without pressing any other buttons.
Note
•When you listen to the sound source other than tuner, you can select the tuner by pressing TUNER/BAND (Automatic Source Selection).
Chapter 3: the Radio
11