Warning indicators and messages (Continued)

disc may enable you to use the disc on your camcorder (DVD-RW/DVD+RW only) (p. 62).

x“Memory Stick Duo” Reinsert the Memory Stick.

•Reinsert the “Memory Stick Duo” a few times. If even then the indicator flashes, the “Memory Stick Duo” could be damaged. Try with another “Memory Stick Duo.”

This Memory Stick is not formatted correctly.

•Check the format, then format the “Memory Stick Duo” with your camcorder if necessary (p. 63, 107).

Memory Stick folders are full.

•You cannot create folders exceeding 999MSDCF. You cannot create or delete created folders using your camcorder.

•Format the “Memory Stick Duo” (p. 63), or delete them using your computer.Cannot save still picture.

•When using the Dual Rec function, do not remove the still image recording media from the camcorder until disc recording is finished and still image recording is complete (p. 36).

xPictBridge compliant printerNot connected to PictBridge compatible printer.

•Switch off the printer and switch it on again, then disconnect the USB cable and reconnect it.

Cannot print. Check the printer.

•Switch off the printer and switch it on again, then disconnect the USB cable and reconnect it.

xOthersNo further selection is possible.•You can select up to 100 images at one time to:–delete images–edit the playlist–print still imagesData protected.•The disc has been protected with another device.Cannot divide.•You cannot divided a movie that is extremely short.Recovering data Avoid any vibration.

•Your camcorder tries to recover data automatically if the data writing was not performed properly.

Cannot recover data on disc.

•Writing data to the disc has failed. Attempts were made to recover the data, but they were unsuccessful.

Please wait.

•This is displayed if the disc removal process takes time. Turn on the camcorder and leave it for about 10 minutes, preventing vibration.

102