1-17 (E)
HDS-X5800
m
The usable optional boards are different depending on the type of signal to handle.
.The HKS-58xxM is the optional board that supports multi-bit rate signal including the HDTV SDI
signal.
For the signal system that handles the HDTV SDI signal, use the HKS-58xxM boards for all the
optional boards starting from input to up to output.
.For the signal system that handles the 270 Mbps serial bit stream signal conforming to the DVB-ASI
standard, use the HKS-5830M board for the matrix board. If the HKS-5830SD board is used, an error
may occur in the signal.
.To use the HKS-58xxM board, the software in the CPU-339 board in the HDS-X5800 should be
upgraded to version 1.20 or higher.
How to read the table
.The letters “a” to “j” are the algebraic number that indicates quantity of the machines. Round up the
numbers under decimal point to integer (whole number).
.The total quantity that is actually required is shown as the number without parenthesis ( ).
The numbers of machines that are shown with parenthesis ( ) are shown for your reference in order to
calculate the required quantity of other models.
Model Quantity Number of matrixes
264 xx
xx
x 272 528 xx
xx
x 272 264 xx
xx
x 544 528 xx
xx
x 544 1024 xx
xx
x 1024
HDS-X5800 a (total quantity) = b x c122416
b = (number of inputs) (1) (2) (1) (2) (4)
divided by 264
c = (number of outputs) (1) (1) (2) (2) (4)
divided by 272
HKS-5810M d (total quantity) = e x c 8 16 16 32 128
HKS-5810SD e = (number of inputs) (8) (16) (8) (16) (32)
Input (connector) divided by 33
board
HKS-5811M f (total quantity) = _8_16 93
HKS-5811SD (b_1) x g
Cascade connection
board
HKS-5820M The same quantity as 8 16 16 32 128
Input (plug-in) board HKS-5810M/5810SD
HKS-5830M h (total quantity) = g x b 8 16 16 32 124
HKS-5830SD g = (number of outputs) (8) (8) (16) (16) (31)
Matrix board divided by 34
HKS-5860M The same quantity as 8 16 16 32 124
HKS-5860SD HKS-5830M/5830SD
Output (connector)
board
PFV-SP3300*i = j divided by 17 __16 32 61
Signal processing (When HKPF-SP003 is
unit installed in all of the 17
slots)
HKPF-SP003*j = (number of inputs) __264 528 1024
Signal distribution
board
* : Because the HKPF-SP003 is capable of six distributions of a signal, it is suited for the HDS-X5800 that requires four distribution at the
maximum.
The HKPF-SP003 is installed in the PFV-SP3300.
1-10. How to Extend Inputs and Outputs