Adjusting the Position — Tilting

Note

When moving the camera with the viewfinder attached, always lower the viewfinder to its standard (lowest) position and push the lock lever towards the camera lens. Also, verify that the lift-lock release knob is fitted into the standard position depression.

1 Pull the lock lever towards the rear of the camera.

Lock lever

2 While pulling the lift-lock release knob, grasp the viewfinder handle and lift the viewfinder to its middle or top position.

Note

If the viewfinder is raised while holding onto the lift- lock release knob only, the viewfinder may not lock properly in the desired height position. Always lift the viewfinder while holding onto both the lift-lock release knob and the handle.

3 Turn the friction adjustment knob to set the desired tilt friction.

Friction adjustment knob

4 Adjust the tilt angle.

After setting the viewfinder to the desired angle, push the lock lever towards the camera lens to lock the viewfinder in position.

60°

25°

25°

60°

Middle position

Top position

8(E)