Adjustments
Navigating the menu
1 Press the center of the Joystick to display the main menu.
Main menu
,
the resolution of the current | 60 . 0kHz / 75Hz | the horizontal |
input signal (only if the signal | 1024 768 | and vertical |
matches to one of the |
| frequencies |
recommended VESA timing |
| of the current |
modes). |
| input signal |
2 Move the joystick m/M to highlight the main menu you want to adjust and press the center of the Joystick.
Sub menu
S I ZE / CENTER
, 
,
2 6
3 Move the joystick m/M to highlight the sub menu you want to adjust. Then move the joystick </, to make adjustments.
Adjusting the brightness and contrast
Brightness and contrast adjustments are made using a separate BRIGHTNESS/CONTRAST menu. These adjustments are effective for all input signals.
1 Move the joystick in any direction to display the BRIGHTNESS/CONTRAST menu.
2Move the joystick m/M to adjust the brightness (
), and </, to adjust the contrast (
).
BR I GHTNESS / CONTRAS T
2 6 | 2 6 |
Note
If you set the brightness and contrast level to “0”, the picture will black out and no picture will appear.
4