Timer recording radio programs

— Rec Timer

You can record a preset radio station from a specified time.

To timer record, you must first preset the radio station (see “Presetting radio stations” on page 18) and set the clock (see “Setting the clock” on page 12).

1 Tune in the preset radio station (see “Listening to a preset station” on page 19).

2 Press CLOCK/TIMER SET.

3 Press . or > repeatedly to select “REC SET”, then press ENTER.

“ON” appears and the hour indication flashes.

4 Set the time to start recording.

Press . or > repeatedly to set the hour, then press ENTER.

The minute indication flashes.

Press . or > repeatedly to set the minute, then press ENTER.

5 Set the time to stop recording following the same procedure as step 4.

The start time, the stop time, and the preset radio station to be recorded (e.g., “FM 5”) appear in turn, before the original display returns.

6 Load a recordable tape.

7 Press ?/1 to turn off the system.

Other operations

To

Do this

Activate the timer/

1

Press CLOCK/TIMER

check the setting

 

SELECT.

 

2

Press . or >

 

 

repeatedly until “REC SEL”

 

 

appears, then press ENTER.

 

 

Change the setting

Start over from step 1.

 

 

 

Cancel the timer

1

Press CLOCK/TIMER

 

 

SELECT.

 

2

Press . or >

 

 

repeatedly until “TIMER

OFF” appears, then press

ENTER.

Notes

You cannot activate the Play Timer and the Rec Timer at the same time.

If you use the Rec Timer and the Sleep Timer at the same time, the Sleep Timer has priority.

Do not operate the system from the time the system turns on until the recording starts (about 15 seconds before the preset time).

If the system is on about 15 seconds before the preset time, the Rec Timer will not be activated.

The volume is reduced to minimum during recording.

The Rec Timer is canceled automatically after the Rec Timer has been activated.

Timer

25GB