Send the following data after the respective ITEM numbers.
First byte (30H to 39H):
Specify the day of the week (Mo, . . . Su,
Second to fifth bytes (30H30H30H30H to 32H33H35H39H):
Specify TIME1 (00:00 to 23:59, two digits each). Sixth byte (30H to 37H):
Specify REC1 (REC Stop, mode 1, . . . mode 5, Alarm REC, No Setting).
Seventh to tenth bytes (30H30H30H30H to 32H33H35H39H):
Specify TIME2 (00:00 to 23:59, two digits each). Eleventh byte (30H to 37H):
Specify REC2 (REC Stop, mode 1, . . . mode 5, Alarm REC, No Setting).
No. 89: ALARM SETSend the following data after the ITEM number (38H39H).
First byte (30H to 34H):
Specify Alarm recording mode (NORMAL,
INTERLEAVE, EVENT, PREALARM, FRAME). Second byte (30H to 34H):
Specify the recording mode (1 to 5) for Alarm recording.
Third byte (30H to 34H):
Specify the release condition (30 seconds, 1 minute, . . . Tape End).
Fourth and fifith bytes (30H30H to 31H30H): Specify the
Set the cameras (0: NO REC, 1: REC) for each recoding mode, 1 to 5, with 4 bytes after the ITEM number (39H32H to 39H36H), then subsequently send the following data.
First byte (30H to 3FH):
Set camera 8 to 5 with lower 4 bits. Second byte (30H to 3FH):
Set camera 4 to 1 with lower 4 bits. Third byte (30H to 3FH):
Set camera 16 to 13 with lower 4 bits. Fourth byte (30H to 3FH):
Set camera 12 to 9 with lower 4 bits.
Fifth to seventh bytes (30H31H30H to 39H39H30H): Set the tape length (10 to 990 minutes).
Eighth byte (30H, 32H, 33H, 34H):
Set the image quality mode (LOW, MID, HIGH SUPER).
Nineth to twelveth bytes (30H30H30H31H to 39H39H39H39H):
Set the time mode (None, 1 to 9999 hours). Thirtheenth to Sixteenth bytes (30H30H30H31H to
39H39H39H39H):
Set the recording cycle (None, 00.01 to 99.99 seconds).
To set the time mode or the recording cycle to None, send 3FH3FH3FH3FH.
When both the time mode and recording cycle are set, the time mode takes priority.
No. 155: TIME ADJUSTSend year, month, day, hour, and minute with 2 digits each after the ITEM number (31H35H35H).
21