Remote | Operations | Function |
Button |
|
|
|
|
|
O qa | VCD player/ | Returns to the |
| LD player/ | previous menu or |
| DVD player/ | exits the menu. |
|
| |
| recorder/ |
|
| Hard disc |
|
| recorder/PSX/ |
|
| Satellite tuner |
|
|
|
|
V/v qa | Receiver | Selects a menu item. |
|
|
|
B/b qa | Receiver | Adjusts or changes |
|
| the setting. |
|
|
|
V/v/B/b qa | VCR/ | Selects a menu item. |
| DVD player/ |
|
|
| |
| recorder/ |
|
| Hard disc |
|
| recorder/PSX/ |
|
| Satellite tuner |
|
|
|
|
Notes
•The AUX, MULTI CH* and 12 buttons on the remote are not available for receiver operation.
•Some functions explained in this section may not work depending on the model.
•The above explanation is intended to serve as an example only. Therefore, depending on the component the above operation may not be possible or may operate differently than described.
•When you press input buttons (VIDEO1, VIDEO2, VIDEO3 or DVD), the input mode of the TV might not switch to the corresponding input mode that you want. In this case, press TV/VIDEO button to switch the input mode of the TV.
•To activate the buttons with orange printing, press ALT first before pressing the buttons.
*
Selecting the command mode of the remote
Set the remote command mode using the RM SET UP button and the remote command mode buttons.
Selecting the command modeYou can switch the command mode (AV1 and AV2) of the remote. If the command mode of the receiver and the remote is different, you cannot use the remote to operate the receiver. To change the command mode of the receiver, see page 54.
Press AV1 (or AV2) while holding downRM SET UP.The indicator flashes once (twice for AV2) , then the command mode switches.
To check the command mode of the remotePress RM SET UP. You can check the remote by the indicator.
Mode | Indicator flashes |
AV1once
AV2twice
To reset the remote to factory settingsPress ?/1, AV ?/1 and MASTER VOL – at the same time.The indicator flashes 3 times, then goes off.