Press ALT to light up the button.

Other Operations

Naming preset stations and inputs

You can enter a name of up to 8 characters for preset stations and inputs selected with input buttons, and display it in the receiver’s display. Use the buttons on the receiver for the operation.

1 To index a preset station

Press FM or AM to select the FM or AM band, then tune in the preset station you want to create an index name for (page 26).

To index an input

Press the input button to select the input you want to create an index name for.

2 Press MAIN MENU repeatedly to select “CUSTOM”.3 Press or repeatedly to select “NAME IN”.4 Press ENTER.

The cursor flashes and you can select a character.

5 Use or and + or – to create an index name.

Press + or – repeatedly to select a character, then press > to move the cursor to the next position.

Tips

•You can select the character type as follows by pressing + or – repeatedly.

Alphabet (upper case) t Numbers t Symbols

•To enter a blank space, press + or – repeatedly until a blank space appears in the display.

•If you made a mistake, press < or > repeatedly until the character you want to change flashes, then press + or – repeatedly to select the correct character.

6 Press ENTER to store the index name.

Using the Sleep Timer

You can set the receiver to turn off automatically at a specified time.

Using the remote

1

2 Press SLEEP repeatedly while the power is on.(HT-5950DP only)Press SLEEP repeatedly while the power is on.

Each time you press SLEEP, the display changes cyclically as follows:

2-00-00 t 1-30-00 t 1-00-00 t 0-30-00 t OFF

While using Sleep Timer, “SLEEP” lights up in the display.

Tip

To check the remaining time before the receiver turns off, press SLEEP on the receiver (HT-5950DP only) or use the remote by pressing ALT to light up the button, then press SLEEP. The remaining time appears in the display. If you press SLEEP again, the sleep timer will be canceled.

40US