Oven Cooking
3.Press Convect pad again or wait four seconds.
•BAKE will stop flashing.
•100° or the actual oven temperature if over 100° F will display. It will rise in 5° increments until the preset temperature is reached.
• The fan icon will start to rotate.
4.Allow the oven to preheat for
•When the set oven temperature is reached, one long beep will sound.
•The set temperature will display.
•To recall the set temperature during preheat, press the Convect pad.
5.Place food in the oven.
6.Check cooking progress at the minimum cooking time. Cook longer if needed.
7.When cooking is finished, press Cancel pad.
8.Remove food from the oven.
Convect Notes:
•Roasting times can vary with different cuts of meat.
•It is not necessary to preheat when convect roasting large cuts of meat.
•Refer to “Cooking Made Simple” booklet for suggested roasting temperatures and times.
2.Select the amount of time you want to cook by using the number pads.
•HOLD continues to flash.
•The time will light in the display.
•Time can be set from ten minutes (00:10) to 11 hours, 59 minutes (11:59).
3.While HOLD is still flashing, press Bake or
Convect pad and select the oven temperature. Press the Autoset 0 pad for 350° F or the appropriate number pads.
• The desired function word will flash.
• The oven temperature can be set from 170° F to 550° F.
4.Press the desired function pad again OR wait four seconds.
•The desired function word will remain lit.
•The cooking time will show in the display.
•The actual oven temperature will be displayed during preheat.
•The set temperature will display when the oven is preheated.
When the cooking time has elapsed:
•Four beeps will sound.
•HOLD and WARM will light.
•170° will display.
•Time of day will display.
Cook & Hold
When using the Cook & Hold option, the oven begins to heat immediately after the control has been set. Then, the oven cooks for a specified length of time. When that time has elapsed, the oven will keep the food warm for up to an hour then automatically turn off.
To set Cook & Hold:
1.Press the Cook & Hold pad.
•HOLD will flash to indicate that you are in Cook & Hold programming.
•00:00 will flash in the display.
After one hour in HOLD WARM:
•The oven turns off automatically.
•HOLD and WARM go off.
•Remove food from oven.
To cancel Cook & Hold at any time:
Press the Cancel pad. Remove food from oven.
11
