Baking and Roasting with Convection, Baking Notes

To set Bake: Oven Cooking

Baking

To set Bake:

1. Press the Bake pad.

•BAKE will flash.

•000 will flash in the display.

2. Select the oven temperature. Press the Autoset 0 pad for 350° F or the appropriate number pads.

•Each additional press of the Autoset 0 pad will increase the temperature by 25°.

•The oven temperature can be set from 170° to 550°.

3.Press Bake pad again or wait four seconds.

•BAKE will stop flashing and light in the display.

•100° or the actual oven temperature if over 100° F will display. It will rise in 5° increments until the preset temperature is reached.

4.Allow the oven to preheat for 8-15 minutes.

•When the set oven temperature is reached, one long beep will sound.

•The set temperature will display.

•To recall set temperature during preheat, press Bake pad.

5.Place food in the oven.

6.Check cooking progress at the minimum cooking time. Cook longer if needed.

7. When cooking is finished, press Cancel pad.

8. Remove food from the oven.

Baking Notes:

•To change the oven temperature during cooking, press Bake pad, then press the Autoset 0 pad or appropriate number pads until the desired temperature is displayed.

•To change the oven temperature during preheat, press the Bake pad twice, then press the Autoset 0 pad or appropriate number pads until the desired temperature is displayed.

•If you forget to turn off the oven, it will automatically turn off at the end of 12 hours. If you wish to deactivate this feature, see page 14.

•For additional baking and roasting tips, see “Cooking Made Simple” booklet.

Baking Differences Between Your Old and New Oven

It is normal to notice some baking time differences between a new oven and an old one. See “Adjusting the Oven Temperature” on page 15.