Manuals / Brands / Home Audio / Home Theater System / Sony / Home Audio / Home Theater System

Sony HT-DDW860 Adjusting the tone, Advanced settings, xSB, 34GB, xBASS XX dB, xTREB. XX dB, TONE menu parameters, CUSTOMIZE menu parameters, (Front speaker bass level)

1 56

Download 56 pages, 1.83 Mb

Adjusting the tone

You can adjust the tonal quality (bass, treble level) of the front speakers using the TONE menu.

1 Start playing a source encoded with multi channel surround effects (DVD, etc.).

2 Press MAIN MENU repeatedly to select “TONE”.

3 Press or repeatedly to select the parameter you want to adjust.

For details, see “TONE menu parameters” below.

4 While monitoring the sound, press + or

–repeatedly to select the setting you want.

The setting is entered automatically.

5 Repeat steps 3 and 4 to adjust the other items.

Note

You cannot adjust the tone when the receiver is decoding signals with a sampling frequency of more than 48 kHz, or when DTS-ES Matrix or DTS Neo:6 decoding is applied.

TONE menu parametersxBASS XX dB(Front speaker bass level)xTREB. XX dB(Front speaker treble level)

Initial setting: 0 dB

You can adjust from –6 dB to +6 dB in 1 dB steps.

Advanced settings

Using the CUSTOMIZE menu to adjust the receiver

You can adjust various receiver settings using the CUSTOMIZE menu.

1 Press MAIN MENU repeatedly to select “CUSTOM”.2 Press or repeatedly to select the parameter you want to adjust.

For details, see “CUSTOMIZE menu parameters” below.

3 Press + or – repeatedly to select the setting you want.

The setting is entered automatically.

4 Repeat steps 2 and 3 to adjust the other items.CUSTOMIZE menu parameters

The initial settings are underlined.

xSB XXXX(Surround back decoding mode)

You can use the CUSTOMIZE menu to set the surround back decoding mode (page 30).

For details on each decoding mode, see page 31.

•AUTO

•MTRX

•OFF

Note

This parameter is valid only in the A.F.D. mode (page 27).

34GB

Contents

Page WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture About This Manual Table of Contents 1: Check how to hookup your components Required cords A Audio cord E Coaxial digital cord (supplied) F Monaural audio cord B Audio/video cord 1a: Connecting components with digital audio output jacks 2 Connect the video jacks Hooking up a Super Audio CD/CD player 1b: Connecting components with multi channel output jacks 10GB 1c: Connecting components with only analog audio jacks Hooking up video components 12GB 2: Connecting the antennas 3: Connecting speakers Required cords A Speaker cords (supplied) B Monaural audio cord (supplied) SPEAKERS FRONT B 4:Connecting the AC power cord 5: Setting up the speakers 1 Press ?/1 to turn on the receiver 2 Press MAIN MENU repeatedly to select “SET UP” 3 Press or repeatedly to select the parameter you want to adjust 4 Press + or – repeatedly to select the setting you want x SLSRXXXX/XX (Surround speaker position) 18GB 6:Setting up the sub woofer 7:Adjusting the speaker levels and balance —TEST TONE Selecting the component Listening to multi channel sound — MULTI CH IN Listening to FM/AM radio Storing FM stations automatically — AUTOBETICAL Presetting radio stations Using the Radio Data System (RDS) Changing the display About the indications in the display — 2CH STEREO Enjoying higher fidelity sound — AUTO FORMAT DIRECT Selecting a sound field xC.ST.EX C (CINEMA STUDIO EX C) DCS About CINEMA STUDIO EX modes Selecting a sound field for music Press MUSIC repeatedly to select the sound field you want xHALL — SURR BACK DECODING How to select the surround back decoding mode When you select “SB AUTO” When you select “SB MTRX” When you select “SB OFF” 31GB Switching the audio input mode for digital components — INPUT MODE Customizing sound fields xCTR XXX dB (Center speaker level) xSUR.L. XXX dB (Surround speaker (left) level) xSUR.R. XXX dB Adjusting the tone Advanced settings xDEC (Digital audio input decoding priority) xDUAL (Digital broadcast language selection) xNAME IN Naming preset stations and inputs Using the Sleep Timer Selecting the speaker system Recording Before you use your remote Remote button description 40GB continued 41GB 42GB Selecting the command mode of the remote Programming the remote To cancel programming To activate the input after programming If programming is unsuccessful, check the following: To clear the memory of the remote The numeric codes corresponding to the component and the maker of the component To control a DAT deck To control an MD deck To control a tape deck To control an LD player To control a video CD player To control a TV To control a satellite tuner or cable box To control a tuner 46GB Precautions Troubleshooting Dolby Digital or DTS multi channel sound is not reproduced Recording cannot be done The FM reception is poor Radio stations cannot be tuned in RDS does not work Specifications FM tuner section AM tuner section Video section General Speaker section Sub woofer (SA-WMSP76) Supplied accessories 52GB List of button locations and reference pages Index