Manuals / Brands / Home Audio / Home Theater System / Sony / Home Audio / Home Theater System

Sony HT-DDW860 51GB, General, Video section, Speaker section, FM tuner section, AM tuner section, Information Additional, Surround back speaker (SS-MSP860SB)

1 56

Download 56 pages, 1.83 Mb

Inputs (Digital)

DVD (Coaxial)	Sensitivity: –
	Impedance: 75 ohms

VIDEO 2, SA-CD/CD	Sensitivity: –
(Optical)	Impedance: –

Outputs (Analog)

MD/TAPE (OUT),	Voltage: 800 mV
VIDEO 1 (AUDIO OUT)	Impedance: 10 kiloohms

SUB WOOFER	Voltage: 2 V
	Impedance: 1 kiloohm

Reproduction frequency range:
	28 – 20,000 Hz
Tone

Gain levels	±6 dB, 1 dB step

FM tuner section
Tuning range	87.5 - 108.0 MHz
Antenna	FM wire antenna
Antenna terminals	75 ohms, unbalanced
Intermediate frequency	10.7 MHz

AM tuner section

Tuning range

Models of area code CEL, CEK, AU

With 9-kHz tuning scale:	531 – 1,602 kHz
Antenna	Loop antenna
Intermediate frequency	450 kHz

Video section

Inputs/Outputs

Video:1 Vp-p, 75 ohms

COMPONENT VIDEO:

(Except for models of area code CEL, CEK) Y: 1 Vp-p, 75 ohms PB/CB/B-Y: 0.7 Vp-p, 75 ohms PR/CR/R-Y: 0.7 Vp-p, 75 ohms

80 MHz HD Pass Through

General

Power requirements

Area code	Power requirements
CEL, CEK	230 V AC, 50/60 Hz

AU	240 V AC, 50 Hz

Power consumption

Area code	Power consumption

CEL, CEK, AU	220 W

Power consumption (during standby mode)
	0.3 W
Dimensions (w/h/d) (Approx.)
	430 × 157.5 × 312 mm
	including projecting parts
	and controls
Mass (Approx.)	8.0 kg

Speaker sectionFront speakers (SS-MSP860L/ SS-MSP860R)Center speaker (SS-CNP860) Surround speakers (SS-MSP860SL/ SS-MSP860SR)Surround back speaker (SS-MSP860SB)

Front/center speakers	Full range, magnetically
	shielded
Surround/surround back speakers
	Full range
Speaker units	80 mm cone type
Enclosure type	Bass reflex
Rated Impedance	8 ohms
Dimension (w/h/d) (Approx.)
Front/surround/surround back speakers
	102 × 150 × 126 mm
Center speaker	225 × 102 × 126 mm
Mass (Approx.)
Front speaker	0.8 kg
Center speaker	1.0 kg
Surround speaker	0.7 kg
Surround back speaker	0.7 kg

Information Additional

continued

51GB

Contents

Page WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture About This Manual Table of Contents 1: Check how to hookup your components Required cords A Audio cord E Coaxial digital cord (supplied) F Monaural audio cord B Audio/video cord 1a: Connecting components with digital audio output jacks 2 Connect the video jacks Hooking up a Super Audio CD/CD player 1b: Connecting components with multi channel output jacks 10GB 1c: Connecting components with only analog audio jacks Hooking up video components 12GB 2: Connecting the antennas 3: Connecting speakers Required cords A Speaker cords (supplied) B Monaural audio cord (supplied) SPEAKERS FRONT B 4:Connecting the AC power cord 5: Setting up the speakers 1 Press ?/1 to turn on the receiver 2 Press MAIN MENU repeatedly to select “SET UP” 3 Press or repeatedly to select the parameter you want to adjust 4 Press + or – repeatedly to select the setting you want x SLSRXXXX/XX (Surround speaker position) 18GB 6:Setting up the sub woofer 7:Adjusting the speaker levels and balance —TEST TONE Selecting the component Listening to multi channel sound — MULTI CH IN Listening to FM/AM radio Storing FM stations automatically — AUTOBETICAL Presetting radio stations Using the Radio Data System (RDS) Changing the display About the indications in the display — 2CH STEREO Enjoying higher fidelity sound — AUTO FORMAT DIRECT Selecting a sound field xC.ST.EX C (CINEMA STUDIO EX C) DCS About CINEMA STUDIO EX modes Selecting a sound field for music Press MUSIC repeatedly to select the sound field you want xHALL — SURR BACK DECODING How to select the surround back decoding mode When you select “SB AUTO” When you select “SB MTRX” When you select “SB OFF” 31GB Switching the audio input mode for digital components — INPUT MODE Customizing sound fields xCTR XXX dB (Center speaker level) xSUR.L. XXX dB (Surround speaker (left) level) xSUR.R. XXX dB Adjusting the tone Advanced settings xDEC (Digital audio input decoding priority) xDUAL (Digital broadcast language selection) xNAME IN Naming preset stations and inputs Using the Sleep Timer Selecting the speaker system Recording Before you use your remote Remote button description 40GB continued 41GB 42GB Selecting the command mode of the remote Programming the remote To cancel programming To activate the input after programming If programming is unsuccessful, check the following: To clear the memory of the remote The numeric codes corresponding to the component and the maker of the component To control a DAT deck To control an MD deck To control a tape deck To control an LD player To control a video CD player To control a TV To control a satellite tuner or cable box To control a tuner 46GB Precautions Troubleshooting Dolby Digital or DTS multi channel sound is not reproduced Recording cannot be done The FM reception is poor Radio stations cannot be tuned in RDS does not work Specifications FM tuner section AM tuner section Video section General Speaker section Sub woofer (SA-WMSP76) Supplied accessories 52GB List of button locations and reference pages Index