5:Preparing the receiver and the remote
Connecting the AC power cord (mains lead)Connect the AC power cord (mains lead) to a wall outlet.
AC power cord (mains lead)
To the wall outlet
Performing initial setup operations
Before using the receiver for the first time, initialize the receiver by performing the following procedure. This procedure can also be used to return settings you have made to their factory defaults.
Be sure to use the buttons on the receiver for this operation.
1,2
MASTER VOLUME
?/1
|
|
| DISPLAY | INPUT MODE |
| DIMMER | SLEEP | 2CH |
|
|
|
| INPUT SELECTOR | |
VIDEO IN/ | A.F.D. | MOVIE | MUSIC |
|
PORTABLE AUDIO IN |
|
PHONES
1 Press ?/1 to turn off the receiver.2 Hold down ?/1 for 5 seconds.After “CLEARING” appears on the display for a while, “CLEARED” appears.
All the settings you have changed or adjusted are reset to the initial settings.
Started Getting
21US