Specifications

AUDIO POWER

SPECIFICATIONS

POWER OUTPUT AND TOTAL HARMONIC DISTORTION: (Models of area code U only)

With 6 ohm loads, both channels driven, from 120 – 20,000 Hz; rated 85 watts per channel minimum RMS power, with no more than 1% total harmonic distortion from 250 milliwatts to rated output.

Amplifier section

Power Output1)

Stereo mode (rated) (6 ohms 1 kHz, THD 1%) 85 W + 85 W

Surround mode2) (reference) (6 ohms 1 kHz, THD 10%)

RMS output FRONT:133 W per channel CENTER: 133 W SURROUND: 133 W per channel

Surround mode2) (reference) (6 ohms 100 Hz, THD 10%)

SUB WOOFER: 135 W

1)Measured under the following conditions:

Area code

Power requirements

U, CA

120 V AC, 60 Hz

 

 

2)Reference power output for front, center, surround speakers and sub woofer. Depending on the sound field settings and the source, there may be no sound output.

Inputs

 

Analog

Sensitivity: 800 mV/

 

50 kohms

Digital (Coaxial)

Impedance: 75 ohms

Tone

Gain levels ±6 dB, 1 dB step Reproduction frequency range:

28 – 20,000 Hz

FM tuner section

Tuning range

87.5 - 108.0 MHz

Antenna

FM wire antenna

Antenna terminals

75 ohms, unbalanced

Intermediate frequency

10.7 MHz

AM tuner section

Tuning range

With 10-kHz tuning scale:

530 – 1,710 kHz3)

With 9-kHz tuning scale:

531 – 1,710 kHz3)

AntennaLoop antenna Intermediate frequency

450 kHz

3)You can change the AM tuning scale to 9 kHz or 10 kHz. After tuning in any AM station, turn off the receiver. While holding down MOVIE, press ?/1. All preset stations will be erased when you change the tuning scale. To reset the scale to 10 kHz (or 9 kHz), repeat the procedure.

General

Power requirements

Area code

Power requirements

U, CA

120 V AC, 60 Hz

 

Power output (DIGITAL MEDIA PORT)

DC OUT:

5 V, 0.7 A MAX

Power consumption

 

 

 

Area code

Power consumption

 

 

U

220 W

 

 

CA

290 VA

 

 

Power consumption (during standby mode) 0.3 W

54US