Performing initial setup

operations

Once you have hooked up the speakers and turned on the power, clear the amplifier’s memory. Then specify the speaker parameters (size, position, etc.) and perform any other initial setup operations necessary for your system.

Tip

To check the audio output during settings (to set up while outputting the sound), check the connection (see page 18).

Clearing the amplifier’s memory

Before using your amplifier for the first time, or when you want to clear the amplifier’s memory, do the following.

This procedure is not necessary if the demonstration activates when you turn on the power.

1 Turn off the amplifier.

2 Hold down ?/1 for 5 seconds.

The demonstration starts (see page 2) and all of the following items are reset or cleared:

All sound field parameters are reset to their factory settings.

All SET UP parameters are reset to their factory settings.

The sound fields memorized for each program source are cleared.

The master volume is set to “MIN”.

Performing initial setup operations

Before using your amplifier for the first time, adjust SET UP parameters so that the amplifier correspond to your system. For the adjustable parameters, see the table on page 29. See pages 13–17 for speaker settings and page 24 for other settings.

Multi channel surround

setup

For the best possible surround sound, all

Hooking

 

speakers should be the same distance from the

 

listening position (A).

 

 

 

 

However, the amplifier lets you to place the

Up

center speaker up to 1.5 meters closer (B) and

and

the surround speakers up to 4.5 meters closer

 

(C) to the listening position.

 

 

 

Setting

The front speakers can be placed from 1.0 to

 

12.0 meters from the listening position (A).

 

You can place the surround speakers either

Up

behind you or to the side, depending on the

shape of your room (etc.).

 

 

 

the

 

 

 

 

Place the sub woofer at the same distance from

Speaker

the listening position as the front speaker (left

 

or right).

 

 

 

 

 

 

 

 

 

 

 

 

System

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Sub woofer

 

When placing surround speakers to your side

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

B

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

A

 

 

 

A

 

 

 

 

 

 

 

 

 

 

 

 

 

45°

 

 

 

 

 

 

 

 

 

 

 

 

C

 

 

 

 

 

 

 

 

 

 

 

 

 

 

C

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

90°

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

20°

When placing surround speakers behind you

 

B

Sub woofer

 

 

A

 

A

 

45°

 

C

 

C

 

 

90°

 

 

20°

Note

Do not place the center speaker farther away from the listening position than the front speakers.

continued

13