5:Preparing the receiver and the remote

Connecting the AC power cord

Connect the AC power cord to a wall outlet.

AC power cord

SUB

WOOFER

To the wall outlet

Note

Install this system so that the power cord can be unplugged from the wall socket immediately in the event of trouble.

Performing initial setup operations

Before using the receiver for the first time, initialize the receiver by performing the following procedure. This procedure can also be used to return settings you have made to their factory defaults.

Be sure to use the buttons on the receiver for this operation.

1,2

INPUT SELECTOR

MASTER

VOLUME

?/1

PRESET

SOUND FIELD

MUTING

TUNING

1 Press ?/1 to turn off the receiver.2 Hold down ?/1 for 5 seconds.

After “CLEARING” appears on the display for a while, “CLEARED” appears.

The following items are reset to their factory settings.

•All settings in the LEVEL, TONE, SUR, TUNER, AUDIO and SYSTEM menus.

•The sound field memorized for each input and preset station.

•All sound field parameters.

•All preset stations.

•MASTER VOLUME is set to “VOL MIN”.

•Input is set to “DVD”.

18GB