xA.V. SYNC. (A/V Sync)

•A.V.SYNC. Y (Yes) (Delay time: 68 ms) The audio output is delayed so that the time gap between the audio output and visual display is minimized.

•A.V.SYNC. N (No) (Delay time: 0 ms) The audio output is not delayed.

Notes

•This parameter is useful when you use a large LCD or plasma monitor or a projector.

•This parameter is valid only when you use a sound field selected with the 2CH or A.F.D. buttons.

•This parameter is not valid when PCM 96 kHz or DTS 2048 signals are input.

xCD INPUT (Audio input mode for SA-CD/CD input)

Lets you select the audio input mode for SA-CD/CD input.

•CD AUTO

Gives priority to digital audio signals when there are both digital and analog connections. If there are no digital audio signals, analog audio signals are selected.

•CD OPT

Specifies the digital audio signals input to the DIGITAL SA-CD/CD OPT IN jack.

•CD ANLG

Specifies the analog audio signals input to the SA-CD/CD AUDIO IN (L/R) jacks.

Settings for the system

(SYSTEM menu)

You can use the SYSTEM menu to set the distance of the speakers connected to this system.

Select “6-SYSTEM” in the amplifier menus. For details on adjusting the parameters, see “Navigating through menus” (page 24) and “Overview of the menus” (page 25)

SYSTEM menu parameters

xFRT DIST. (Front speakers distance)

Lets you set the distance from your listening position to the front speakers (A). If both front speakers are not placed an equal distance from your listening position, set the distance as the average distance between the front speakers.

B

 

A 30˚

30˚ A

100˚-120˚

100˚-120˚

C

D

xCNT DIST. (Center speaker distance)

Lets you set the distance from your listening position to the center speaker. Center speaker distance should be set from a distance equal to the front speaker distance (A) to a distance

1.5meters closer to your listening position (B).

30GB