22US

Connecting the AC

power cord (mains lead)

Before connecting the AC power cord
(mains lead) of the Sound Bar and the
subwoofer to a wall outlet (mains),
connect all the other equipment and TV
to the system.

Setting up the Wireless

System

The Sound Bar transmits sound from the
equipment to the subwoofer by wireless
communication.
1Check that the wireless
transceivers (supplied) are
inserted into the wireless
transceiver (EZW-RT50) slot on
the rear panel of both the Sound
Bar and the subwoofer.
For details, see “Installing the
supplied wireless transceivers”
(page 16).
2Press ?/1 to turn the Sound Bar
on.
The subwoofer turns on
automatically and the ?/1 indicator
lights in green when the Sound Bar
is turned on and wireless
transmission is activated.

About the standby mode

The subwoofer enters standby mode
automatically and the ?/1 indicator
lights in red when the Sound Bar is in
standby mode.

To specify a wireless

connection

If you use multiple Sony wireless
products, you can prevent improper
connection by specifying the wireless
connection to be used to link the Sound
Bar to the subwoofer (Secure Link
function).
For details, see “Activating wireless
transmission between specific units
(S. ON)” (page 36).

If no sound is heard from a

subwoofer whose ?/1

indicator stays lit in red

Check the location of the Sound Bar
and subwoofer.
Do not place the Sound Bar and
subwoofer in a metal cabinet.
Do not place an object such as an
aquarium between the Sound Bar and
subwoofer.
Place the subwoofer close to the
Sound Bar in a room.
Check the wireless communication
status (page 37).
Change the frequency for the wireless
system (page 37).