Sony HVL-F43AM operating instructions 3, 4

HVL-F43AM
4-278-307-11(1) GB
C:\édéñÉtÉHÉãÉ_\ÅiäîÅjÉGÉXÉPÉCÉèÅ[Éh\SO-
NY\VX9197\SourceÉfÅ[É^\4278307111\4278307111\4278307111HVLF58AMUC\01GB-
HVLF58AMUC\050C02.fm
Master: Left
22
3Press the shutter button halfway down and make sure
that the subject is within the flash range.
• See page 23 for details on the flash range.
4When the flash unit is charged, press the shutter
button to take a photo.
• The flash unit is fully charged when the TEST button on the contro l panel is
lit in amber.
When the correct exposure has been obtained for the photo just taken, the
TEST button on the control panel blinks in green.
• The photo will be under-exposed because of a lack of luminescence if taken
before charging is complete.
• Press the shutter button after making sure that charging is complete when using
the flash unit with the self-timer.
• The flash mode selected (auto flash ( AUTO), fill-flash ( ), or un-fill-flash
( )) depends on your camera. For details, refer to the operating instructions of
your camera.