Sony HXCU-D70 - page 13

13

Locations and Functions of Parts

oPIX (picture monitor output) connector (BNC type)

Outputs a video signal for a picture monitor. It can also output

a signal with superimposed character display.

pSYNC (sync signal output) connector

Outputs a sync signal for connection to the sync signal input

connector of a waveform monitor or picture monitor.

qINTERCOM/TALLY/PGM (intercom/tally/program

audio) connector (D-sub 25-pin)

Transmits and receives the various intercom, tally, and

program audio signals. It connects to the intercom/tally/

program audio connector of the intercom system.

For information on pin assignment, see

“INTERCOM/TALLY/PGM” in “Pin assignment” on page33.

Depending on the PGM MIX LEVEL settings of the camera, PGM

signal may leak into the INTERCOM output. Turn the PGM MIX

LEVEL settings down to reduce the signal interference.

rTRUNK connector (D-sub 9-pin, RS-232C standard)

Connects to an external device to provide a communication

path via the CCU between that device and another external

device connected to the TRUNK connector on the camera.

For information on pin assignment, see “TRUNK” in “Pi n

assignment” on page34.

Note

Contents

Main HD Camera Control Unit Owners Record For kundene i Norge WARNING For the customers in the U.S.A. For the customers in Europe AVERTISSEMENT WARNUNG Fr Kunden in Europa Fr Kunden in Europa, Australien und Neuseeland WARNUNG Fr Kunden in Europa Table of Contents 6 Overview Features The HXCU-D70 can be connected with a single multi-core cable Easy-to-use control panel Multi-system input/output interface 1 2 8 Preparations Area Settings Before using the unit Setting the area 1 Locations and Functions of Parts Front Panel abcd efgh ij k lm n 10 Page 12 Rear Panel ijm a l knopqr Page 14 Status Display b efg Displaying the Status Screen To display the status screen System status CCU hardware diagnostics Camera system diagnostics Page 3 Network diagnostics 16 Page 3 CCU AT board diagnostics CCU DPR board diagnostics Front panel diagnostics Setup Menu Changing Menu Item Settings To display a menu page To display the CCU MENU page To select an item in the CCU MENU 1 2 3 To exit the menu display Menu Tree SYSTEM OPERATION menu CCU CONFIGURATION menu NETWORK SETTINGS menu Menu List SYSTEM OPERATION menu Note Page CCU CONFIGURATION menu Page Page Page Page Page NETWORK SETTINGS menu Page Appendix Notes on Use Use and storage locations Avoid violent impacts Do not cover with cloth 32 Specifications HXCU-D70 Design and specifications are subject to change without notice. Pin assignment INTERCOM/TALLY/PGM INTERCOM 34 TRUNK