12GB

Step 2: Preparing a Power Source

Remove the film on the display window
before you use the IC recorder.
Slide and lift the battery compartment lid,
insert LR03 (size AAA) alkaline batteries
with correct polarity, and close the lid.
If the battery compartment lid is
accidentally detached, attach it as
illustrated.
zTips
When replacing the batteries, files recorded
or alarm settings are not erased even when
you remove the batteries.
When replacing the batteries, the clock
continues moving for about 1 minute after
you remove the batteries.
PNotes
Do not use manganese batteries for this IC
recorder.
When replacing the batteries, be sure to
replace both batteries with new ones.
Do not charge dry batteries. You cannot
charge the supplied LR03 (size AAA)
alkaline batteries.
When you are not going to use the IC
recorder for a long time, remove the batteries
to prevent damage from battery leakage and
corrosion.
The clock setting window appears and the
year section lights when you insert batteries
for the first time, or when you insert
batteries after the IC recorder has been
without batteries for a certain period of
time. See “Step 4: Setting the Clock” on
page 15 to set the date and time.