15GB
Getting Started

Step 4: Setting the Clock

You need to set the clock to use the alarm
function or record the date and time.
When you insert batteries for the first time,
or when you insert batteries after the IC
recorder has been without batteries for
more than 1 minute, the “Set Date&Time”
message appears, and the year section is
selected with the cursor in the clock setting
window.
Set the clock as follows:
1Set the year.
Press –. or >+ to select the year,
and then press NPLAY/
STOP•ENTER.
Select the last two digits of the year.
When you press NPLAY/
STOP•ENTER, the cursor moves to the
month section.
2Set the month, day, hour, and minute in
sequence in the same way.
Press –. or >+ to select the
desired figures, and then press
NPLAY/STOP•ENTER.
When you set the minute, the
“Executing...” animation is displayed,
and then the stop mode window appears.
x
NPLAY/
STOP•ENTER
., >+
•DISP
MENU