Setting the Overwrite Mode
You can select the overwrite mode when you add an overwrite recording to a previously recorded message.
MENU | Jog lever (>/.) |
ENTER
CANCEL
1 Press MENU.
The menu mode will be displayed.
2 Press the jog lever up or down (>/
.) to select “OVER WT” (overwrite), then press ENTER.
The overwrite mode selection window is displayed.
•OVER: The portion left after the overwrite recording will remain in the message.
Stopping point for the overwrite recording
Starting point of the overwrite | The remaining portion in Message 2 | |
recording |
| |
|
| |
|
|
|
Message 1 | Message 2 | Message 3 |
Functions Other
Message 1 | Message 2 |
| Message 3 |
|
|
|
|
|
|
Added overwrite recording in Message 2
Continued