Various Recording Modes

Starting to Record Automatically in Response to Sound

– the VOR Function

2

1

1 Press the control key toward orto set “VOR” to “ON” in the menu, and then press ENT.2 Press (record/pause).

” and “ ” appear in the display window.

The recording starts when the IC recorder detects sound. The recording pauses when no sound is detected

and “ ” and “ ” flash. When the IC recorder detects sound again, the recording starts again.

To cancel the VOR function

Set “VOR” to “OFF” in the menu.

Notes

The VOR function is affected by the sound around you. Set “MIC SENS” in the menu according to the recording conditions. If recording is not satisfactory after you have changed the microphone sensitivity, or for an important recording, set “VOR” to “OFF” in the menu.

If you press (record/pause) to pause recording when “VOR” is set to “ON” in the

menu, only “

” flashes.

Modes Recording Various

21GB