*This is an approximation for the time it takes to charge from no remaining battery power to full battery power at room temperature. It varies depending on the remaining power and the condition of the battery. It also takes more time if the temperature of the battery is low, or if the battery is charged while you are transferring data to the IC recorder.
Disconnecting the IC recorder from the AC outlet
Follow the procedures below; otherwise, data may be damaged.
1 If you are recording or playing back a message, press (stop) to put theIC recorder into the stop mode.2 Make sure that the operation indicator is not flashing.3 Disconnect the USB AC adaptor from the AC outlet, and then disconnect the IC recorder from the USB AC adaptor.
Notes
While “
” or “
” is being displayed instead of the remaining battery/charging indicator, you cannot charge the battery.
Charge the battery in an environment with a temperature of 5 °C - 35 °C.
While playing back messages using the built- in speaker, you cannot charge the battery.
During recording (the operation indicator lights or flashes in red) or accessing data (the operation indicator flashes in orange),
the IC recorder should not be connected to or disconnected from the USB AC adaptor connected to the AC outlet.
the USB AC adaptor connected to the IC recorder should not be connected to or disconnected from the AC outlet.
Doing so may damage the data. If the IC recorder is required to process a large amount of data, the
While a USB AC adaptor (not supplied) is being used, the remaining battery/charging indicator does not appear in the display window.
Information Additional