ModelName: ICD‑TX50
PartNumber: 4‑300‑042‑11(1)
95
95
Additional Information
Index
Table of
Contents
Additional Information
Using a USB AC Adaptor
To (USB) connector
USB connecting cable
You can charge the built‑in rechargeable battery by connecting the IC recorder
to an AC outlet using a USB AC adaptor (not supplied). You can charge the
battery while you are using the IC recorder, so that it is useful when you want
to record for a long time.
When you use the IC recorder for the first time, or after you have not used t he
IC recorder for a certain period of time, charge the batter y continuously until
” is displayed.
It takes about 1 hour 30 minutes to fully charge an exhausted battery.*
* This is an approximation for the time it takes to charge from no remaining battery power to full
battery power at room temperature. It varies depending on the remaining power and the
condition of the battery.
Connect a USB AC adaptor (not supplied) to an AC outlet.
Connect the USB AC adaptor to the supplied USB connecting cable.
Connect the USB connecting cable to the (USB) connector of the
IC recorder.
While the battery is charging, the battery indicator is displayed in an
animation.
Now you can use the IC recorder while charging the battery.
Battery indicator
Note
While playing back files using the built‑in speaker, you cannot charge the battery.