Functions that can be selected using the MENU button
Functions list
GB
39
(Custom Settings)Audio Recording Sets whether to record audio when shooting a movie.
(On/Off)
Audio Rec Level Adjusts the audio recording level during movie recording.
(0 to 31)
Audio Out Timing Sets the timing of audio output during the movie recording.
(Live/Lip Sync)
Wind Noise Reduct. Reduces wind noise during movie recording.
(On/Off)
Memory recall Calls up settings pre-registered in [Memory].
(1/2/M1-M4)
Memory Registers the desired modes or camera settings.
(1/2/M1-M4)
Zebra Displays stripes to adjust brightness.
(Off/70 to 100/100+)
MF Assist Displays an enlarged image when focusing manually.
(On/Off)
Focus Magnif. Time Sets the length of time the image will be shown in an
enlarged form.
(2 Sec/5 Sec/No Limit)
Grid Line Sets a grid line display to enable alignment to a structural
outline.
(Rule of 3rds Grid/Square Grid/Diag. + Square Grid/Off)
Marker Display Sets whether to display the marker on the monitor when
recording movies.
(On/Off)
Marker Settings Sets the marker displayed on the monitor when recording
movies.
(Center/Aspect/Safety Zone/Guideframe)
Audio Level Display Sets Audio Level Display.
(On/Off)
Auto Review Sets auto review to display the captured image after shooting.
(10 Sec/5 Sec/2 Sec/Off)
DISP Button Sets the type of information to be displayed on the monitor or
in the viewfinder by pressing DISP on the control wheel.
(Monitor/Finder)