Identifying parts
GB
22
ABattery insertion slot (48)
BBattery cover (48)
CTripod socket hole
• Use a tripod with a scr ew less
than 5.5mm (7/32 inches) long.
Otherwise, you cannot firmly
secure the camera, and damage
to the camera may occur.
DBattery cover locking button
EBattery cover release lever
• When you attach a vertical grip
(sold separately), remove the
battery cover.

Connection plate cover

Use this when using an AC-PW20
AC Adaptor (sold separately).
Insert the connection plate into the
battery compartment, and then pass
the cord through the connection
plate cover as shown below.
• Make sure that the cord is not
pinched when you close the
cover.
Bottom view